CalcDrillFree guides

Calc 2 · Integrals and series · Final exam

Calculus 2 final exam review

About 25 min read · Report a mistake

Most Calculus 2 final questions come down to one decision: which technique, or which test? The algebra after that is usually routine. This review starts with that decision. Practice it on 13 quick “first move” items, read a one-screen recap of each unit, follow 6 fully worked exam-style examples, then take an 18-question practice exam that checks every answer and shows which unit to review.

What a Calculus 2 final usually covers

Your syllabus is the final word, but most Calculus 2 finals are cumulative and are built from the same five blocks. Series and integration techniques often carry the most points; parametric and polar curves show up on many finals, though not all.

The five blocks of a typical Calculus 2 final
BlockWhat they usually askReview here
Integration techniquesu-substitution, integration by parts (including tabular), trig integrals, trig substitution, partial fractions, improper integralsIntegration recap
Applications of integralsArea between curves, volumes by disks, washers and shells, arc lengthApplications recap
Sequences and seriesDoes it converge? Which test? Absolute or conditional? Sum of a geometric seriesSeries tests
Power and Taylor seriesRadius and interval of convergence, Maclaurin series from known ones, approximations and errorPower series recap
Parametric and polardy/dx for a parametric curve, area inside a polar curveParametric and polar

Which technique? Which test? Decide first

Before you write any algebra, name the method. Go down each list in order and stop at the first “yes.”

For an integral

  1. Simplify first. Can you expand, split a fraction, or use an identity to make it a basic integral?
  2. u-substitution. Is there an inside function whose derivative (up to a constant) is also sitting there?
  3. Integration by parts. Is it a product of two different kinds of function, like x · eˣ, x² ln x, or eˣ sin x?
  4. Trig identities. Is it powers of sin and cos, or of sec and tan?
  5. Trig substitution. Is there a √(a² − x²), √(a² + x²) or √(x² − a²) with no matching x outside to make a u-substitution work?
  6. Partial fractions. Is it one polynomial divided by another? Divide first if the top degree is at least the bottom degree.
  7. Improper? If a limit is ∞ or the function blows up somewhere on [a, b], rewrite it as a limit before anything else.

For a series

  1. nth-term test. Do the terms go to 0? If not, the series diverges, and you are done.
  2. Known type. Is it geometric (Σ arⁿ) or a p-series (Σ 1/nᵖ)? Read off the answer.
  3. Factorials or nth powers? Use the ratio test. If the whole term is something to the nth power, use the root test.
  4. Alternating signs? Test Σ|aₙ| first. If that diverges, use the alternating series test to see if it converges conditionally.
  5. Fraction of powers of n? Limit comparison (or direct comparison) with the p-series you get from the highest powers.
  6. Easy to integrate? Something like 1/(n ln n) is built for the integral test.

Try it: name the first move

For each one, pick the method you would start with. You are not solving anything yet, only choosing. Then press “Check my picks.”

Integrals

Series

Answers to the first-move practice
  1. u-substitution, u = x²
  2. Integration by parts, u = ln x
  3. Trig identities: save one cos x
  4. Trig substitution, x = 2 tan θ
  5. Partial fractions
  6. u-substitution, u = 1 − x² (not trig substitution)
  7. nth-term test: diverges
  8. Geometric, r = 2/5: converges
  9. Ratio test: converges
  10. Root test: converges
  11. Integral test: diverges
  12. Limit comparison with Σ 1/n² (direct comparison also works): converges
  13. Alternating series test: converges conditionally

Integration techniques in one screen

u-substitution

Look for a function inside another one whose derivative is also in the integral. For ∫ x ex² dx, let u = x², so du = 2x dx and the integral becomes ½∫ eᵘ du = ½ex² + C. It is the chain rule run backward (rusty? try these chain rule practice problems). On a definite integral, change the limits to u-values so you never have to switch back.

Integration by parts

∫ u dv = uv − ∫ v du

Pick u to be the part that gets simpler when you differentiate it. The LIATE order (logs, inverse trig, algebra, trig, exponentials) is a decent first guess, not a law. When u is a polynomial, use the tabular method: differentiate u down to 0, integrate dv the same number of times, and multiply along the diagonals with signs +, −, +, … (see Example 1). For ∫ eˣ sin x dx, integrate by parts twice until the original integral comes back, then solve for it like an unknown. More practice: integration by parts practice.

Trig integrals

For ∫ sinᵐx cosⁿx dx: if one of the powers is odd, save one factor of that function, convert the rest with sin²x + cos²x = 1, and substitute u = the other function. If both powers are even, use the half-angle identities sin²x = (1 − cos 2x)/2 and cos²x = (1 + cos 2x)/2. For sec and tan: with an even power of sec, save sec²x and let u = tan x; with an odd power of tan and at least one sec factor, save sec x tan x and let u = sec x.

Trig substitution

Which substitution for which square root
You seeSubstituteThe root becomesIdentity used
√(a² − x²)x = a sin θa cos θ1 − sin²θ = cos²θ
√(a² + x²)x = a tan θa sec θ1 + tan²θ = sec²θ
√(x² − a²)x = a sec θa |tan θ|sec²θ − 1 = tan²θ

Do not forget dx (for x = a sin θ, dx = a cos θ dθ). To get back to x at the end, draw a right triangle from the substitution, as in Example 3. For √(x² − a²), keep the absolute value when tan θ is negative.

Partial fractions

For a polynomial over a polynomial: first, if the top degree is at least the bottom degree, do long division. Then factor the bottom and split. Each distinct linear factor (x − a) gets A/(x − a). A repeated factor (x − a)² gets A/(x − a) + B/(x − a)². An irreducible quadratic like x² + 4 gets (Ax + B)/(x² + 4), which integrates to a log plus an arctangent. Plugging in the roots of the bottom is the fastest way to find A and B (Example 2).

Improper integrals

An integral is improper if a limit is infinite or the function blows up somewhere on the interval. Replace the bad spot with a letter and take a limit: ∫ from 1 to ∞ of 1/x² dx = lim as b → ∞ of (1 − 1/b) = 1, so it converges. Two facts worth memorizing: ∫ from 1 to ∞ of 1/xᵖ dx converges only when p > 1, and ∫ from 0 to 1 of 1/xᵖ dx converges only when p < 1. Watch for hidden ones: ∫ from −1 to 1 of 1/x² dx blows up at x = 0 and diverges. Just plugging in the endpoints gives −2, which is wrong (a positive function cannot have a negative integral).

Applications: area, volume, arc length

Area between curves: A = ∫ (top − bottom) dx between the intersection points. If the curves are easier as functions of y, use ∫ (right − left) dy. Sketch first so you know which curve is on top.

Volumes of revolution: pick the method from the slice
MethodSlice isFormula (about the x-axis)Use it when
DiskPerpendicular to the axis, no holeV = π ∫ R² dxThe region touches the axis
WasherPerpendicular to the axis, with a holeV = π ∫ (R² − r²) dxThere is a gap between the region and the axis
ShellParallel to the axisV = 2π ∫ (radius)(height) dyWashers would force you to solve for the other variable

About the y-axis, swap the roles: washers use dy, and shells use V = 2π ∫ x · (height) dx. About a line like y = −1 or x = 2, measure every radius as a distance to that line. For y = −1, R = (top curve) + 1.

Arc length: L = ∫ from a to b of √(1 + (f′(x))²) dx. These are usually built so the root simplifies. For y = (2/3)x3/2 from 0 to 3, f′(x) = √x, so L = ∫ from 0 to 3 of √(1 + x) dx = (2/3)(43/2 − 1) = 14/3.

Sequences and series: the tests

A sequence aₙ is a list; it converges if aₙ approaches a number. A series Σ aₙ is a sum; it converges if its partial sums approach a number. Mixing those up is a classic mistake: aₙ → 0 does not mean Σ aₙ converges (the harmonic series Σ 1/n diverges).

Convergence tests and what each one can tell you
TestUse it whenConclusion
nth-term (divergence)Always check firstIf aₙ does not approach 0, the series diverges. If aₙ → 0, no conclusion.
GeometricΣ a rⁿConverges if |r| < 1, to (first term)/(1 − r). Diverges if |r| ≥ 1.
p-seriesΣ 1/nᵖConverges if p > 1, diverges if p ≤ 1.
Integral testf(n) = aₙ is positive, continuous, decreasing and easy to integrateThe series and ∫ from 1 to ∞ of f(x) dx both converge or both diverge.
Direct comparisonPositive terms, an obvious bigger or smaller seriesSmaller than a convergent series: converges. Bigger than a divergent one: diverges.
Limit comparisonPositive terms that are fractions of powers of nIf lim aₙ/bₙ is a positive finite number, both series do the same thing.
Alternating seriesΣ (−1)ⁿ bₙConverges if bₙ decreases to 0. The error after stopping is at most the next term.
RatioFactorials, things like 2ⁿ or nⁿL = lim |aₙ₊₁/aₙ|. L < 1 converges absolutely, L > 1 diverges, L = 1 no conclusion.
RootThe whole term is to the nth powerL = lim |aₙ|1/n, same conclusions as the ratio test.

Absolute vs. conditional: Σ aₙ converges absolutely if Σ |aₙ| converges, and absolute convergence guarantees convergence. It converges conditionally if Σ aₙ converges but Σ |aₙ| does not. The standard example is the alternating harmonic series Σ (−1)ⁿ⁺¹/n: it converges (to ln 2), but Σ 1/n diverges. The ratio test gives L = 1 for every p-series, which is why it is the wrong tool for them.

Power series and Taylor series

A power series Σ cₙ(x − a)ⁿ converges on an interval centered at a. For the usual exam problems, find it in four steps:

  1. Use the ratio test on the absolute value of the terms, keeping x in. If the ratio test gives no answer, try the root test or another method.
  2. Set the limit less than 1 and solve to get |x − a| < R. R is the radius.
  3. That gives the open interval (a − R, a + R).
  4. Plug in each endpoint and test the number series you get. The endpoints can go either way, and each one needs its own test.

The Taylor series of f centered at a is Σ f⁽ⁿ⁾(a)/n! · (x − a)ⁿ. Centered at 0 it is called a Maclaurin series. On most finals you are expected to know these by heart:

Maclaurin series to memorize
FunctionSeriesValid for
1/(1 − x)1 + x + x² + x³ + …−1 < x < 1
eˣ1 + x + x²/2! + x³/3! + …All x
sin xx − x³/3! + x⁵/5! − …All x
cos x1 − x²/2! + x⁴/4! − …All x
ln(1 + x)x − x²/2 + x³/3 − …−1 < x ≤ 1
arctan xx − x³/3 + x⁵/5 − …−1 ≤ x ≤ 1

Build new series from these instead of taking derivatives: substitute (e−x² = 1 − x² + x⁴/2! − …), multiply by a power of x, or differentiate or integrate term by term inside the radius. Series also turn hard limits into easy ones: (sin x − x)/x³ = (−x³/6 + x⁵/120 − …)/x³ → −1/6. For error, use the alternating series bound when the series alternates. Otherwise use Taylor’s inequality: |Rₙ(x)| ≤ M|x − a|ⁿ⁺¹/(n + 1)!, where M bounds |f⁽ⁿ⁺¹⁾| between a and x.

Parametric and polar curves

Check your syllabus: many courses put these on the final, some do not.

  • Parametric slope: dy/dx = (dy/dt)/(dx/dt). For the second derivative, differentiate dy/dx with respect to t, then divide by dx/dt again.
  • Parametric arc length: L = ∫ √((dx/dt)² + (dy/dt)²) dt.
  • Polar to rectangular: x = r cos θ, y = r sin θ, r² = x² + y².
  • Polar area: A = ½ ∫ from α to β of r² dθ. Between two curves: ½ ∫ (R² − r²) dθ. Find the θ-limits by sketching or by setting the curves equal.
  • Polar arc length: L = ∫ √(r² + (dr/dθ)²) dθ.

Six worked final exam problems

Example 1: tabular integration by parts

Evaluate ∫ from 0 to 1 of x² eˣ dx.

  1. A polynomial times eˣ: use the tabular method with u = x² and dv = eˣ dx.
  2. Derivatives of x²: x², 2x, 2, 0. Integrals of eˣ: eˣ, eˣ, eˣ.
  3. Multiply along the diagonals with signs +, −, +: x²eˣ − 2x eˣ + 2eˣ = eˣ(x² − 2x + 2).
  4. Check by differentiating: eˣ(x² − 2x + 2) + eˣ(2x − 2) = x²eˣ. It works.
  5. Evaluate: at x = 1, e(1 − 2 + 2) = e. At x = 0, 1 · 2 = 2.

Answer: e − 2 ≈ 0.718. The usual slip is a missing minus sign on the middle term.

Example 2: partial fractions

Find ∫ (5x + 1)/(x² + x − 2) dx.

  1. The top has degree 1 and the bottom degree 2, so no long division.
  2. Factor the bottom: x² + x − 2 = (x − 1)(x + 2).
  3. Write (5x + 1)/((x − 1)(x + 2)) = A/(x − 1) + B/(x + 2), so 5x + 1 = A(x + 2) + B(x − 1).
  4. Plug in x = 1: 6 = 3A, so A = 2. Plug in x = −2: −9 = −3B, so B = 3.
  5. Check: 2(x + 2) + 3(x − 1) = 5x + 1. It works.
  6. Integrate each piece: ∫ 2/(x − 1) dx + ∫ 3/(x + 2) dx.

Answer: 2 ln|x − 1| + 3 ln|x + 2| + C.

Example 3: trig substitution and the triangle

Find ∫ dx/(x² √(x² + 4)).

  1. √(x² + 4) is the a² + x² form with a = 2, so let x = 2 tan θ. Then dx = 2 sec²θ dθ and √(x² + 4) = √(4 tan²θ + 4) = 2 sec θ.
  2. Substitute: ∫ 2 sec²θ dθ / (4 tan²θ · 2 sec θ) = ¼ ∫ sec θ/tan²θ dθ.
  3. Rewrite in sin and cos: sec θ/tan²θ = (1/cos θ) · (cos²θ/sin²θ) = cos θ/sin²θ.
  4. Let u = sin θ, du = cos θ dθ: ¼ ∫ u⁻² du = −1/(4u) = −1/(4 sin θ) + C.
  5. Back to x with a triangle: tan θ = x/2, so the opposite side is x, the adjacent side is 2, and the hypotenuse is √(x² + 4). Then sin θ = x/√(x² + 4).

Answer: −√(x² + 4)/(4x) + C. Differentiating this gives back 1/(x²√(x² + 4)). We checked that numerically too.

Example 4: one region, two axes

The region between y = x and y = x² is rotated (a) about the x-axis and (b) about the y-axis. Find both volumes.

  1. The curves meet where x = x², so at x = 0 and x = 1. On that interval x ≥ x², so the line is on top.
  2. (a) About the x-axis, slices perpendicular to the axis have a hole: washers with R = x and r = x². V = π ∫ from 0 to 1 of (x² − x⁴) dx = π(1/3 − 1/5) = 2π/15.
  3. (b) About the y-axis, vertical slices are parallel to the axis: shells with radius x and height x − x². V = 2π ∫ from 0 to 1 of x(x − x²) dx = 2π(1/3 − 1/4) = π/6.
  4. Check (b) with washers in y: for each y, x runs from y (the line) out to √y (the curve). V = π ∫ from 0 to 1 of (y − y²) dy = π(1/2 − 1/3) = π/6. It matches.

Answers: (a) 2π/15 ≈ 0.419, (b) π/6 ≈ 0.524. The same region gives different volumes around different axes, so never reuse the setup without redrawing it.

Example 5: interval of convergence

Find the interval of convergence of Σ from n = 1 to ∞ of (x − 3)ⁿ/(n · 2ⁿ).

  1. Ratio test: |aₙ₊₁/aₙ| = |x − 3|ⁿ⁺¹/((n + 1)2ⁿ⁺¹) · n2ⁿ/|x − 3|ⁿ = (|x − 3|/2) · n/(n + 1).
  2. As n → ∞, n/(n + 1) → 1, so the limit is |x − 3|/2.
  3. Set it less than 1: |x − 3| < 2. So R = 2 and the open interval is 1 < x < 5.
  4. Endpoint x = 5: the series becomes Σ 2ⁿ/(n · 2ⁿ) = Σ 1/n, the harmonic series. Diverges.
  5. Endpoint x = 1: the series becomes Σ (−2)ⁿ/(n · 2ⁿ) = Σ (−1)ⁿ/n. It alternates and 1/n decreases to 0, so it converges (conditionally).

Answer: [1, 5). Include x = 1, exclude x = 5.

Example 6: a series to estimate an integral

Estimate ∫ from 0 to 1 of sin(x²) dx with an error less than 0.0001.

  1. sin(x²) has no elementary antiderivative, so use a series. Start from sin u = u − u³/3! + u⁵/5! − u⁷/7! + … and put in u = x².
  2. sin(x²) = x² − x⁶/6 + x¹⁰/120 − x¹⁴/5040 + …
  3. Integrate term by term from 0 to 1: 1/3 − 1/42 + 1/1320 − 1/75600 + …
  4. This alternates and the terms shrink to 0, so stopping early leaves an error no bigger than the first term you skip. 1/75600 ≈ 0.0000132, which is under 0.0001, so three terms are enough.
  5. 1/3 − 1/42 + 1/1320 ≈ 0.33333 − 0.02381 + 0.00076 = 0.31028.

Answer: about 0.3103. A numerical integration gives 0.310268, which is within the bound.

Calculus 2 practice exam: 18 questions

Work each one on paper first. Then type your answer and press Check (or Enter), or pick a choice and press Check. You can type exact answers like pi/2 - 1, 1/2 ln(3/2), 4/15 or 8pi, or decimals to at least three places. When you are done, press “Score my exam” at the bottom to see how you did on each unit.

Part A: Integration techniques (questions 1 to 5)

Show solution 1

Parts with u = x and dv = cos x dx, so du = dx and v = sin x. The integral is [x sin x] from 0 to π/2 minus ∫ from 0 to π/2 of sin x dx = π/2 − [−cos x] from 0 to π/2 = π/2 − 1.

π/2 − 1 ≈ 0.571

Show solution 2

The power is odd, so save one sin x: sin³x = (1 − cos²x) sin x. Let u = cos x, du = −sin x dx. The limits become u = 1 to u = 0: ∫ from 1 to 0 of (1 − u²)(−du) = ∫ from 0 to 1 of (1 − u²) du = 1 − 1/3.

2/3

3. What is the best first move for ∫ √(9 − x²) dx?
Show solution 3

The form √(a² − x²) with a = 3 means x = 3 sin θ, dx = 3 cos θ dθ, and √(9 − 9 sin²θ) = 3 cos θ. The integral becomes 9 ∫ cos²θ dθ, which you finish with the half-angle identity.

x = 3 sin θ

Show solution 4

Factor: x² − 1 = (x − 1)(x + 1). From 1 = A(x + 1) + B(x − 1), x = 1 gives A = ½ and x = −1 gives B = −½. The antiderivative is ½ ln|x − 1| − ½ ln|x + 1| = ½ ln|(x − 1)/(x + 1)|. At 3 that is ½ ln(1/2), at 2 it is ½ ln(1/3). Subtract: ½(ln(1/2) − ln(1/3)) = ½ ln(3/2).

½ ln(3/2) ≈ 0.2027

Show solution 5

The function blows up at x = 0, so take a limit: lim as t → 0⁺ of ∫ from t to 1 of x−1/2 dx = lim (2√1 − 2√t) = 2. This matches the rule: ∫ from 0 to 1 of 1/xᵖ converges when p < 1, and here p = ½.

2

Part B: Applications (questions 6 to 8)

Show solution 6

Intersections: 4 − x² = x + 2 gives x² + x − 2 = 0, so x = −2 and x = 1. At x = 0 the parabola (4) is above the line (2). A = ∫ from −2 to 1 of (2 − x − x²) dx = [2x − x²/2 − x³/3] from −2 to 1 = 7/6 − (−10/3) = 27/6.

9/2 = 4.5

Show solution 7

Disks with R = √x: V = π ∫ from 0 to 4 of (√x)² dx = π ∫ from 0 to 4 of x dx = π · 16/2.

8π ≈ 25.13

8. The region under y = x² from x = 0 to x = 2 is rotated about the y-axis. Which integral gives the volume?
Show solution 8

Vertical slices are parallel to the y-axis, so they sweep out shells. Radius = distance to the y-axis = x, height = x². V = 2π ∫ from 0 to 2 of x³ dx = 2π · 4 = 8π.

2π ∫ from 0 to 2 of x · x² dx

Part C: Series (questions 9 to 12)

Show solution 9

Geometric with r = 1/3 and first term 4/3. Sum = (4/3)/(1 − 1/3) = (4/3)/(2/3).

2

10. What happens to Σ from n = 1 to ∞ of n/(n³ + 1)?
Show solution 10

Let bₙ = 1/n². Then aₙ/bₙ = n³/(n³ + 1) → 1, a positive finite number. Σ 1/n² is a p-series with p = 2 > 1, so it converges, and so does this one.

Converges by limit comparison with Σ 1/n²

11. Classify Σ from n = 1 to ∞ of (−1)ⁿ/√n.
Show solution 11

Absolute values: Σ 1/√n = Σ 1/n1/2, a p-series with p = ½ ≤ 1, so it diverges. The signed series alternates and 1/√n decreases to 0, so it converges by the alternating series test.

Conditionally convergent

12. What happens to Σ from n = 1 to ∞ of n!/10ⁿ?
Show solution 12

aₙ₊₁/aₙ = ((n + 1)!/10ⁿ⁺¹) · (10ⁿ/n!) = (n + 1)/10 → ∞ > 1, so it diverges. (The terms themselves grow without bound, so the nth-term test also works.)

Diverges by the ratio test

Part D: Power and Taylor series (questions 13 to 16)

Show solution 13

Ratio test: |aₙ₊₁/aₙ| = ((n + 1)/n) · |x + 1|/4 → |x + 1|/4. Less than 1 means |x + 1| < 4.

R = 4

14. What is the interval of convergence of Σ from n = 1 to ∞ of xⁿ/n²?
Show solution 14

Ratio: |x| · n²/(n + 1)² → |x|, so R = 1. At x = 1: Σ 1/n², a p-series with p = 2, converges. At x = −1: Σ (−1)ⁿ/n², whose absolute values are Σ 1/n², converges absolutely. Compare Example 5, where one endpoint failed.

[−1, 1]

Show solution 15

Substitute u = 2x into sin u = u − u³/3! + u⁵/5! − …. The x⁵ term is (2x)⁵/5! = 32x⁵/120.

32/120 = 4/15

Show solution 16

eˣ − 1 − x = x²/2 + x³/6 + …. Divide by x²: ½ + x/6 + …, which goes to ½. (L’Hôpital twice gives the same answer.)

1/2

Part E: Parametric and polar (questions 17 and 18)

Show solution 17

dy/dt = 3t² and dx/dt = 2t, so dy/dx = 3t²/(2t) = 3t/2. At t = 2 that is 3.

3

Show solution 18

The curve is traced once for θ from 0 to 2π. A = ½ ∫ from 0 to 2π of (1 + cos θ)² dθ = ½ ∫ (1 + 2 cos θ + cos²θ) dθ. Over a full turn, ∫ 1 = 2π, ∫ 2 cos θ = 0, and ∫ cos²θ = π. So A = ½(2π + π).

3π/2 ≈ 4.712

Your score will appear here. Blank answers count as not yet correct.

Answer key

Open all 18 answers
  1. π/2 − 1 ≈ 0.571
  2. 2/3
  3. x = 3 sin θ (trig substitution)
  4. ½ ln(3/2) ≈ 0.2027
  5. 2
  6. 9/2
  7. 8π ≈ 25.13
  8. 2π ∫ from 0 to 2 of x · x² dx (= 8π)
  9. 2
  10. Converges by limit comparison with Σ 1/n²
  11. Conditionally convergent
  12. Diverges by the ratio test
  13. R = 4
  14. [−1, 1]
  15. 4/15
  16. 1/2
  17. 3
  18. 3π/2 ≈ 4.712

Where Calculus 2 final points usually go

  • Calling the nth-term test a convergence test. Terms going to 0 never proves convergence. It only rules out the obvious divergence.
  • Skipping the endpoints. The ratio test gives the radius, not the interval. Test x = a − R and x = a + R separately.
  • Using the ratio test on a p-series. It always gives L = 1 there, which tells you nothing.
  • Plugging into an improper integral. Write the limit, especially when the trouble spot is in the middle of the interval.
  • Dropping dx in trig substitution, or forgetting to switch back to x at the end.
  • Wrong radius in volumes. Measure from the axis you are spinning around, and square R and r separately: R² − r², not (R − r)².
  • Starting a geometric sum at the wrong term. The sum is (first term)/(1 − r), and the first term depends on where n starts.

Common questions

What topics are on a Calculus 2 final exam?

Use your syllabus as the final list. Most Calculus 2 finals cover integration techniques (u-substitution, integration by parts, trig integrals, trig substitution, partial fractions), improper integrals, area and volume, sequences and series with the convergence tests, power series, and Taylor and Maclaurin series. Many also include parametric equations and polar curves.

What is the hardest part of Calculus 2?

Many students find series the hardest part, because there is no single method: you have to choose a test, and some tests give no conclusion. Practicing the choice on its own, without finishing every problem, is a fast way to get better at it.

How do I know which convergence test to use?

Check the nth-term test first. Then look for a geometric or p-series. Use the ratio test for factorials and nth powers, the root test when the whole term is to the nth power, the alternating series test for alternating signs, limit comparison for fractions of powers of n, and the integral test when the terms are easy to integrate.

Do I need to memorize Taylor series for the Calculus 2 final?

Usually, yes. Know the Maclaurin series for 1/(1 − x), eˣ, sin x, cos x, ln(1 + x) and arctan x, along with where each one converges. Many other series questions are built from these by substituting, multiplying by a power of x, or differentiating or integrating term by term.

How should I study for a Calculus 2 final in a week?

Take one practice exam first to find your weakest unit. Spend most of the week there, working problems by hand. Practice the first-move decision on mixed integrals and series every day, since that is where most points are lost. The day before, redo only the problems you missed.

Keep practicing

Try 3 days free

3 days free, no card needed.

Sources and fact checks

Methods, tests and series were checked against OpenStax Calculus Volume 2. The problems and numbers were written for this guide, and every answer was checked numerically.